2011 March
Commissioned a new plant for hot dip zinc plating of pipes and large-sized steel structures as long as up to 12.5 m and a height of 2.5 m, the equipment is capable of applying the zinc coating from 40 to 250 microns.
Galvanizing of pipes is made in the automatic mode and allows to receive the covering conforming to the European DIN EN 10240 standard. The equipment works with pipes with diameters from ½ ” to 4” (144) and lengths from 4.0 to 8.2 m.
Galvanizing of pipes is made in the automatic mode and allows to receive the covering conforming to the European DIN EN 10240 standard. The equipment works with pipes with diameters from ½ ” to 4” (144) and lengths from 4.0 to 8.2 m.
2012 May
The company celebrated its 100th anniversary.
In order to expand the range (including high-strength fasteners), as well as to increase production and exports, the project "Creation of additional capacities of fasteners shop", included in the program of innovative development of economic activities of the Ministry of industry for 2011-2015, was successfully implemented.
A Museum of "Nail", there is a memorial plaque to the founders of plant brothers Vladimir and Boris Rick.
In order to expand the range (including high-strength fasteners), as well as to increase production and exports, the project "Creation of additional capacities of fasteners shop", included in the program of innovative development of economic activities of the Ministry of industry for 2011-2015, was successfully implemented.
A Museum of "Nail", there is a memorial plaque to the founders of plant brothers Vladimir and Boris Rick.
2013
The investment project "Creation of additional galvanizing capacities"was implemented. The project involved the creation of a new galvanic site with a capacity of 1,000 t/month, which allowed to increase the volume of exports of bolts, nuts, screws in the Republic of Belarus, the Russian Federation and abroad, as well as to manufacture import-substituting products.
In the framework of the project was reconstructed and screw the plot line installation, galvanizing, built outbuilding for wastewater treatment facilities, purchased and installed automatic production line galvanizing and water treatment facilities for the electroplatings wastes treatment.
The project also provided for the reconstruction of the power supply system of ZMI " RMZ " with the replacement of two - single-transformer substations /400KVA, 1000KVA/ for a complete transformer substation of modular type with two transformers /1600KVA/ and high and low voltage switchgears with the replacement of the 10kV supply cable.
In order to increase the additional production capacity of nail production, the investment project "technical re-equipment of nail production"was implemented. A complete reconstruction of the building of the special nails section was carried out, 18 high-tech n-90 wafiosag /Germany machines with controlled unwinding devices for the production of EPAL nails were purchased and installed. Purchased 19 of the nail production machines HSCPA "Prigma Press" /Ukraine/.
OJSC "RMZ" received a certificate for the production of anchor nails marking and nailing for the production of pallets EPAL-EUR. The use of new equipment contributed to the increase in the production of nails with a calibrated head, machine nails collected in cassettes, and screw nails with marking, expanding markets and increasing exports. By increasing the productivity of the equipment and eliminating expensive energy-intensive cleaning (halting) of nails, the Prime cost of products decreased.
In the fastening shop began the development of a new product – screws with a cylindrical head and hexagonal recess under the key, accuracy class A, strength class 8.8 GOST 11738-84 (HexagonsocketheadcapscrewsDIN 912), as well as released an experimental batch of M12 screw length 25,30,35 mm.these screws are used to connect structural elements in mechanical engineering, instrumentation and other industrial and construction industries together with nuts, washers of appropriate sizes.
On the equipment of German company WAFIOS started the production of nails with D-shaped head is smooth and has finished, with a diameter of 2.8, and 3.1 in length from 63 to 98 mm.
Production of hot-dip galvanized bolts and nuts has been established.
In the framework of the project was reconstructed and screw the plot line installation, galvanizing, built outbuilding for wastewater treatment facilities, purchased and installed automatic production line galvanizing and water treatment facilities for the electroplatings wastes treatment.
The project also provided for the reconstruction of the power supply system of ZMI " RMZ " with the replacement of two - single-transformer substations /400KVA, 1000KVA/ for a complete transformer substation of modular type with two transformers /1600KVA/ and high and low voltage switchgears with the replacement of the 10kV supply cable.
In order to increase the additional production capacity of nail production, the investment project "technical re-equipment of nail production"was implemented. A complete reconstruction of the building of the special nails section was carried out, 18 high-tech n-90 wafiosag /Germany machines with controlled unwinding devices for the production of EPAL nails were purchased and installed. Purchased 19 of the nail production machines HSCPA "Prigma Press" /Ukraine/.
OJSC "RMZ" received a certificate for the production of anchor nails marking and nailing for the production of pallets EPAL-EUR. The use of new equipment contributed to the increase in the production of nails with a calibrated head, machine nails collected in cassettes, and screw nails with marking, expanding markets and increasing exports. By increasing the productivity of the equipment and eliminating expensive energy-intensive cleaning (halting) of nails, the Prime cost of products decreased.
In the fastening shop began the development of a new product – screws with a cylindrical head and hexagonal recess under the key, accuracy class A, strength class 8.8 GOST 11738-84 (HexagonsocketheadcapscrewsDIN 912), as well as released an experimental batch of M12 screw length 25,30,35 mm.these screws are used to connect structural elements in mechanical engineering, instrumentation and other industrial and construction industries together with nuts, washers of appropriate sizes.
On the equipment of German company WAFIOS started the production of nails with D-shaped head is smooth and has finished, with a diameter of 2.8, and 3.1 in length from 63 to 98 mm.
Production of hot-dip galvanized bolts and nuts has been established.
2014
In the process of implementation of the investment project " Technical re-equipment of the plant of metal products."
In the framework of the project reconstruction of buildings of wood screw plot, built with modern equipment room Metrology lab, purchased, installed and put into operation 34 units of cold heading equipment for production of fasteners.
The implementation of the project will increase the production of heat-treated products of strength class 8.8, 10.9 to 500 tons per month, including the production of self-tapping screws to 150 tons per month, increase exports and expand markets, to produce import-substituting products.
In the process of mastering the production of screws (DIN 912) with a cylindrical head hexagonal recess under the key, diameter m 6-8 mm.
In the framework of the project reconstruction of buildings of wood screw plot, built with modern equipment room Metrology lab, purchased, installed and put into operation 34 units of cold heading equipment for production of fasteners.
The implementation of the project will increase the production of heat-treated products of strength class 8.8, 10.9 to 500 tons per month, including the production of self-tapping screws to 150 tons per month, increase exports and expand markets, to produce import-substituting products.
In the process of mastering the production of screws (DIN 912) with a cylindrical head hexagonal recess under the key, diameter m 6-8 mm.
2015
The investment project "Technical re-equipment of the metal products plant shop"was implemented.
Within the framework of the project, a part of the screw shop was reconstructed in axes a – B; 4 – 16 under the thermal section, with the installation of a conveyor tempering and tempering unit of the model SY 805-6 with a capacity of up to 500 tons./mesa. the room of metrological laboratory for mechanical tests of fixture is constructed and equipped with the modern equipment. 34 units of cold – landing equipment for the production of screws and self-tapping screws were purchased, installed and put into operation within the technical re-equipment.
The implementation of the project allowed to increase the production of heat-treated products of strength class 8.8, 10.9 to 500 tons per month, including the production of self-tapping screws to 150 tons per month, to increase exports and expand markets, to produce import-substituting products.
In order to save material resources, one of the activities of the energy saving program 2014-2015 "introduction of a cogeneration unit with a capacity of 1.6 MW"was implemented. Ie. in accordance with the investment agreement of the Gomel regional Executive Committee with the limited liability company "Eastern generating company" for the implementation of the investment project "Construction and operation of Mini – CHP on the basis of gas-piston unit with an installed electrical capacity of up to 2 MW" in the territory of JSC "RMZ" mini CHP with gas-piston unit TEDOMQUANTOD1600
The cogeneration plant was built at the expense of the investor, with the attraction of foreign investments, with subsequent exploitation by the investor. General contractor – Stroy group of OJSC "RMZ". In addition to electrical energy, exhaust heat recovery, thermal energy is generated by removing heat from the engine cooling circuit. Water parameters 90-70°C is supplied to the reverse network of the enterprise, used for heating chemically purified water before the deaerator. The heat of the technological circuit is used to heat the initial water.
The economic effect for JSC "RMZ" is achieved by reducing electricity tariffs by 15%, the price of thermal energy by 25%.
Within the framework of the project, a part of the screw shop was reconstructed in axes a – B; 4 – 16 under the thermal section, with the installation of a conveyor tempering and tempering unit of the model SY 805-6 with a capacity of up to 500 tons./mesa. the room of metrological laboratory for mechanical tests of fixture is constructed and equipped with the modern equipment. 34 units of cold – landing equipment for the production of screws and self-tapping screws were purchased, installed and put into operation within the technical re-equipment.
The implementation of the project allowed to increase the production of heat-treated products of strength class 8.8, 10.9 to 500 tons per month, including the production of self-tapping screws to 150 tons per month, to increase exports and expand markets, to produce import-substituting products.
In order to save material resources, one of the activities of the energy saving program 2014-2015 "introduction of a cogeneration unit with a capacity of 1.6 MW"was implemented. Ie. in accordance with the investment agreement of the Gomel regional Executive Committee with the limited liability company "Eastern generating company" for the implementation of the investment project "Construction and operation of Mini – CHP on the basis of gas-piston unit with an installed electrical capacity of up to 2 MW" in the territory of JSC "RMZ" mini CHP with gas-piston unit TEDOMQUANTOD1600
The cogeneration plant was built at the expense of the investor, with the attraction of foreign investments, with subsequent exploitation by the investor. General contractor – Stroy group of OJSC "RMZ". In addition to electrical energy, exhaust heat recovery, thermal energy is generated by removing heat from the engine cooling circuit. Water parameters 90-70°C is supplied to the reverse network of the enterprise, used for heating chemically purified water before the deaerator. The heat of the technological circuit is used to heat the initial water.
The economic effect for JSC "RMZ" is achieved by reducing electricity tariffs by 15%, the price of thermal energy by 25%.
2016
The implementation of the 1st stage of the investment project "Creation of production facilities for the production of high-strength fasteners and screws for roofing, window, GWL and screws for construction materials"was completed.
It provided for the technical re-equipment of the area of calibrated nails for the production of M6-M10 bolts with an annual output of 1500 tons per year (125 tons/month.) with the purchase and installation of cold-heading and rolling equipment in the amount of 6 units.
The equipment is installed in a new area, which will produce fastening products, not previously produced by the enterprise.
This equipment will be in demand for fasteners of the largest consumers of normals: OJSC "Minsk tractor plant"; OJSC "AMKODOR" - holding managing company, ZAO "Atlant"; JSC "MAZ" - managing company of the holding "BELAVTOMAZ"; JSC "holding Management company "Minsk motor plant" and products that are in demand in the foreign markets.
It provided for the technical re-equipment of the area of calibrated nails for the production of M6-M10 bolts with an annual output of 1500 tons per year (125 tons/month.) with the purchase and installation of cold-heading and rolling equipment in the amount of 6 units.
The equipment is installed in a new area, which will produce fastening products, not previously produced by the enterprise.
This equipment will be in demand for fasteners of the largest consumers of normals: OJSC "Minsk tractor plant"; OJSC "AMKODOR" - holding managing company, ZAO "Atlant"; JSC "MAZ" - managing company of the holding "BELAVTOMAZ"; JSC "holding Management company "Minsk motor plant" and products that are in demand in the foreign markets.
2017
Implementation of the second stage of the investment project "Creation of production capacities on production of high-strength fixture and self-cutting screws of roofing, window, GWL and screws for construction materials"came to the end.
At this stage, the screw section in axes 14-16 was modernized with the purchase and installation of a conveyor tempering and tempering unit for heat treatment of fasteners.
The put into operation thermal equipment will allow to receive to 500 tons a month of high-strength fixture of a class of durability 8.8 and 10.9 and screws self-tapping for construction materials in all branches of national economy. This product is in demand in all markets and has a higher added value compared to conventional fasteners.
Currently, work is underway to implement the 3rd stage of the project, which is based on the development of the production of roofing screws.
At this stage, the screw section in axes 14-16 was modernized with the purchase and installation of a conveyor tempering and tempering unit for heat treatment of fasteners.
The put into operation thermal equipment will allow to receive to 500 tons a month of high-strength fixture of a class of durability 8.8 and 10.9 and screws self-tapping for construction materials in all branches of national economy. This product is in demand in all markets and has a higher added value compared to conventional fasteners.
Currently, work is underway to implement the 3rd stage of the project, which is based on the development of the production of roofing screws.